Re: M76 - PROIZVDNJA, MADE IN USA (OHIO)
Posted: 04 Oct 2021, 15:37
Ta pravila koja si dao, treba traziti objasnjenje da li se koriste.
To su pravila za mach sa puskama na mehanicke nisane.
I za 223 i 308. U f class imas i druge kalibre u openu.
A sama pravila za f-class ne pozivaju se na ovaj anex pravila TR.
Tako da se ne bih zakleo, da se to mora tako primijeniti.
Imas na istome i ovo pravilo
T3.11 Wind flags will be to host country specification, and should be of the form of a triangular
pennant (which may be truncated at the fly); of one or two solid colours (but a small
appropriate sponsor’s logo is permitted); and of size and height dictated by local topography
and prevailing conditions. Ideally red should be avoided if possible, if flags are likely to be
viewed against a background of green vegetation. At or near sea level it is desirable that the
weight of the material used should be close to 165grams per square metre. Guidance as to
the layout of flags on new construction ranges is offered at Annex T/F.
Zanimljivo za kalibre, ogranicavaju trezinu,zrna, itd - nema veze sa f-class na optiku
T2.19.2.1. The .308 bullet diameter will be between .3075” and .3085”. No
single bullet may exceed 156 grains in weight (or the factory
tolerance for 155 grain ammunition where factory ammunition is in
use).
T2.19.2.2. The bullet diameter for .223 Remington will be between .2235” and
.2245”. No single bullet may exceed 91 grains in weight (or the
factory tolerance for 90 grain ammunition where factory ammunition
is used).
To su pravila za mach sa puskama na mehanicke nisane.
I za 223 i 308. U f class imas i druge kalibre u openu.
A sama pravila za f-class ne pozivaju se na ovaj anex pravila TR.
Tako da se ne bih zakleo, da se to mora tako primijeniti.
Imas na istome i ovo pravilo
T3.11 Wind flags will be to host country specification, and should be of the form of a triangular
pennant (which may be truncated at the fly); of one or two solid colours (but a small
appropriate sponsor’s logo is permitted); and of size and height dictated by local topography
and prevailing conditions. Ideally red should be avoided if possible, if flags are likely to be
viewed against a background of green vegetation. At or near sea level it is desirable that the
weight of the material used should be close to 165grams per square metre. Guidance as to
the layout of flags on new construction ranges is offered at Annex T/F.
Zanimljivo za kalibre, ogranicavaju trezinu,zrna, itd - nema veze sa f-class na optiku
T2.19.2.1. The .308 bullet diameter will be between .3075” and .3085”. No
single bullet may exceed 156 grains in weight (or the factory
tolerance for 155 grain ammunition where factory ammunition is in
use).
T2.19.2.2. The bullet diameter for .223 Remington will be between .2235” and
.2245”. No single bullet may exceed 91 grains in weight (or the
factory tolerance for 90 grain ammunition where factory ammunition
is used).
a i glavni moderator se pridruzio 
